Sony DCR-HC28 Operating Guide - Page 55
LCD screen/viewfinder, A problem occurs when the camcorder is connected to the AC Adaptor. - troubleshooting
View all Sony DCR-HC28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting The CHG (charge) lamp flashes while the battery pack is being charged. • Attach the battery pack to the camcorder correctly (p. 12). If the problem persists, disconnect the AC Adaptor from the wall outlet and contact your Sony dealer. The battery pack may be worn-out. The power turns off frequently although the remaining battery time indicator indicates that the battery pack has enough power to operate. • A problem has occurred in the remaining battery time indicator, or the battery pack has not been charged enough. Fully charge the battery again to correct the indication (p. 12). The remaining battery time indicator does not indicate the correct time. • Ambient temperature is too high or too low, or the battery pack has not been charged enough. This is not a malfunction. • Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace it with a new one (p. 12, 66). • The indicated time may not be correct in certain circumstances. For example, when you open or close the LCD panel, it takes about 1 minute to display the correct remaining battery time. The battery pack discharges too quickly. • Ambient temperature is too high or too low, or the battery pack has not been charged enough. This is not a malfunction. • Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace it with a new one (p. 12, 66). A problem occurs when the camcorder is connected to the AC Adaptor. • Turn off the power, and disconnect the AC Adaptor from the wall outlet. Then, connect it again. LCD screen/viewfinder A rippling effect appears on the LCD screen when you touch it. • This is not a malfunction. Do not press hard on the LCD screen. An unknown picture appears on the LCD screen or viewfinder. • The camcorder is in [DEMO MODE] (p. 47). Touch the LCD screen or insert a cassette to cancel [DEMO MODE]. An unknown indicator appears on the screen. • A warning indicator or message appears on the screen (p. 61). Continued , 55