Sony DCR TRV11 Operating Instructions - Page 66
Using with analog video unit and PC – Signal convert function
UPC - 027242571723
View all Sony DCR TRV11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Using with analog video unit and PC - Signal convert function You can convert analog video signals into digital video signals via your camcorder connected to a PC and analog video unit. Analog video signals t Digital video signals You can capture images and sound from an analog video unit connecting a PC which has the i.LINK (DV) jack to your camcorder. (1) Set the POWER switch to VCR. (2) Set DISPLAY in to LCD in the menu settings. (3) Set A/V t DV OUT in to ON in the menu settings. (4) Start playback on the analog video unit slightly ahead of the point from which you want to start capturing images. (5) Start capturing procedures on your PC. The operation procedures depend on your PC and the software which you use. For details on how to capture images, refer to the instruction manual of PC and software. VCR DV IN/OUT IN S VIDEO VIDEO AUDIO : Signal flow i. LINK After capturing images and sound Stop capturing procedures on your PC, and stop the playback on the analog video unit. Notes • You need to install software which can exchange video signals. • Depending on the condition of the analog video signals, the PC may not be able to output the images correctly when you convert analog video signals into digital video signals via your camcorder. Depending on the analog video unit, the image may contain noise or incorrect colors. 66