Sony DEV-50 Operating Guide - Page 20
Using menus directly, Controlling the image settings, manually with the MANUAL dial - binoculars
View all Sony DEV-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Notes The following states will be indicated if data is still being written onto the memory card after recording has finished. During this time, do not apply shock or vibration to this product, or remove the battery or AC Adaptor. Access lamp (p. 17) is lit or flashing The media icon in the upper right of the screen is flashing You cannot shoot photos when [2D/3D Mode Select] is set to [3D]. Select (MENU) [Image Quality/Size] [2D/3D Mode Select] [2D]. You cannot shoot photos in 3D. To switch the 2D and 3D recording mode You can select a recording mode of either 2D or 3D. To switch 2D and 3D, select (MENU) [Image Quality/Size] [2D/3D Mode Select]. Recommended distance from the subject and zooming level The distance at which you can obtain good 3D movies varies depending on the zooming level. Recommended recording distance (approx.) Zoom 2 m to (9 m) [6 ft. to (30 ft.)] 6 m to (16 m) [20 ft. to (51 ft.)] 24 m to (30 m) [78 ft. to (100 ft.)] A subject farther away than the recommended recording distance will lose 3D depth. Notes You should not record a subject closer than the recommended recording distance in 3D because an uncomfortable movie will be recorded. Record the subject in 2D. GB 20 When you record 3D movies, the binocular magnification can be set to up to about 6 . If you want to view or record a subject at greater magnification, set [2D/3D Mode Select] to [2D]. Using menus directly By registering a favorite menu to the left part of the viewfinder screen, you can use the assigned menu directly ([My Button], p. 26). The default settings are [Hyper Gain], [2D/3D Mode Select] and [VF Brightness]. Controlling the image settings manually with the MANUAL dial It is convenient to assigning a menu item to the MANUAL dial (p. 36). By pressing the MANUAL button, you can use the assigned menu. Also, by pressing and holding the MANUAL button for a few seconds, you can assign a desired menu item. Acquiring location information using the GPS (DEV-50V) Set [GPS Setting] to [On] (p. 27). appears on the screen, and this product starts acquiring the location information. The acquired location information is recorded on movies and photos.