Sony DPFD1010 Operating Instructions - Page 11

Let's get the photo frame ready Let's get the photo frame ready Remote control (except for DPFD700) Pull out the protective sheet before use as shown in the figure. Protective sheet Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame. P Notes • If the remote control stops working: Replace the battery (CR2025 lithium battery) with a new one. • When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion. Replacing procedures: CD-ROM (Handbook) page 10 P WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Stand Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel. You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. zTips x When the photo frame is placed in the portrait orientation • The display is automatically rotated on the portrait orientation. • A video file is not rotated automatically even if you change the orientation of the photo frame (DPF-D1020/D820/D720 only). x Sony logo When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up. Continued 11 GB