Sony DPFD1010 Operating Instructions - Page 28

Connecting to a computer P Notes • Use a mini B-Type USB cable.* * When you use a commercially available USB cable, use a USB cable with a mini B-type plug (for the USB mini B connector of this unit, frameside connector type) shorter than 3 meters. • If multiple USB devices are connected to a computer or if a hub is used, a problem may occur. In such a case, simplify the connection. • You cannot operate the photo frame from another USB device being used simultaneously. • Do not disconnect the USB cable during data communication. • Operation with all computers that satisfy the recommended system requirements is not guaranteed. • The photo frame has been demonstrated as operable when connected to a computer. When other devices are connected to the photo frame, these devices may not recognize the internal memory of photo frame. • Do not connect a computer to the USB mini B connector on the photo frame simultaneously when a USB memory is connected to the EXT INTERFACE (USB A) connector. 1 Connect the AC adaptor to the photo frame, and to the AC power source. 2 Connect the computer and photo frame with a commercially available USB cable. 3 Turn the photo frame on. 4 Operate the computer to exchange images with the internal memory of the photo frame. To USB mini B connector Computer To USB connector System Requirements x Windows Recommended OS: Microsoft Windows 7/Windows Vista SP2 / Windows XP SP3 Port: USB port x Macintosh Recommended OS: Mac OS X (v10.4 or later) Port: USB port 28 GB