Sony DPFD1010 Operating Instructions - Page 12

To display the photo frame on the wall, Hang the photo frame on the wall by fitting the hole - 10 2 inch

Page 12 highlights

PNotes • Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. • When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. • Remove the stand when you hang the photo frame on the wall. • Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet. • We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc. • Tighten the screws firmly to avoid the photo frame from falling. To display the photo frame on the wall 1 Prepare screws (not supplied) suitable for the screw holes on the rear panel. 4 mm (3/16 inch) More than 25 mm (1 inch) φ5 mm (7/32 inch) 10 mm (13/32 inch) Holes for hanging the unit on the wall 2 Screw the screws (not supplied) into the wall. Be sure the screws (not supplied) protrude between 2.5 mm to 3 mm (1/8 inch) from the surface of the wall. Between 2.5 mm to 3 mm (1/8 inch) 3 Hang the photo frame on the wall by fitting the hole on the rear panel to the screws on the wall. 12 GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

12
GB
To display the photo frame on the wall
1
Prepare screws (not supplied) suitable for the screw
holes on the rear panel.
2
Screw the screws (not supplied) into the wall.
Be sure the screws (not supplied) protrude between 2.5 mm to
3 mm (
1
/
8
inch) from the surface of the wall.
3
Hang the photo frame on the wall by fitting the hole on
the rear panel to the screws on the wall.
4 mm (
3
/
16
inch)
More than 25 mm (1 inch)
φ
5 mm
(
7
/
32
inch)
10 mm
(
13
/
32
inch)
Holes for hanging
the unit on the wall
Between
2.5 mm to 3 mm
(
1
/
8
inch)
P
Notes
Use screws suitable for the quality
of the material of the wall. The
screws may be damaged,
depending on the type of material
used in the wall. Set the screws in
a pillar or stud in the wall.
When you want to re-insert the
memory card, remove the photo
frame from the wall, then eject and
re-insert the memory card while
the photo frame is placed on a
stable surface.
Remove the stand when you hang
the photo frame on the wall.
Connect the DC cable of the AC
adaptor to the photo frame and
hang the photo frame on the wall.
Then connect the AC adaptor to
the wall outlet.
We take no responsibility for any
accidents or damage caused by
defects of attachment, misuse, or
natural disasters, etc.
Tighten the screws firmly to avoid
the photo frame from falling.