Sony DSC-HX400V User Guide - Page 54
Memory recall, Toward −
View all Sony DSC-HX400V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
1. Set the mode dial to M (Manual Exposure). 2. Press the bottom button on the control button to select the shutter speed or aperture value, then turn the control dial to select a value. Check the exposure value at "MM" (metered manual). Toward +: Images become brighter. Toward − : Images become darker. 0: Appropriate exposure analyzed by the product 3. Adjust the focus and shoot the subject. Note [ISO AUTO] cannot be selected for [ISO] in manual exposure mode. In manual exposure mode, the [ISO AUTO] setting under [ISO] is switched to the minimum ISO sensitivity. Change the ISO value to your desired setting if necessary. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The (SteadyShot warning) indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot. How to Use Shooting Selecting a shooting mode Memory recall Allows you to shoot an image after recalling often-used modes or camera settings registered in advance. 1. Set the mode dial to 1 or 2 (Memory recall). 2. Press on the center of the control button. Note Register shooting settings in advance by [Memory]. If you set [Memory recall] after completing the shooting settings, the registered settings are given priority and the original settings may become invalid. Check the indicators on the screen before shooting. 44