Sony DSC R1 Users Guide - Page 52
Selecting Flash Synchro, Using an external flash, Select the timing that the flash strobes.
UPC - 027242679627
View all Sony DSC R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Selecting Flash Synchro Select the timing that the flash strobes. Front Rear P S AM Multi-selector MENU button 1 Display the (Setup) screen (page 32). 2 Select 2 (Camera 2) by moving the multi-selector to v/V, then select [Flash Sync.] by moving to B/v/V. 3 Select the desired mode by moving to B/v/V, then press the center of the multi-selector. ( : The default setting) Front Normally, use this setting. Since the flash strobes right after the shutter is released, this allows you to get your shot closer to the time you release the shutter. Rear (REAR) Used for a moving subject, etc. Since the flash strobes right before the shutter is closed, this allows you to reflect the trail of a light or movement afterimage on a subject. On the [Rear] • When the shutter speed is too high, the [Rear] setting effect may not be available. • When the red-eye reduction is selected, the red-eye reduction effect may not be available at slower shutter speeds. Using an external flash P S AM You can mount an optional external flash. Using an external flash increases the amount of light and that will allow you to shoot more vivid flash pictures than when using the internal flash. For details, refer to the operating instructions supplied with your flash. 52