Sony DSLR A230L Instruction Manual - Page 46
Using the SteadyShot function
UPC - 027242748699
View all Sony DSLR A230L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Camera shake warning indicator Due to potential camera shake, the (Camera shake warning) indicator flashes in the viewfinder. In this case, use a tripod or the flash. (Camera shake warning) indicator Note • The (Camera shake warning) indicator is displayed only in the modes that automatically set the shutter speed. This indicator is not displayed in M/S modes. Using the SteadyShot function This SteadyShot function can reduce the effect of camera shake by the equivalent of approximately 2.5 to 3.5 increments of shutter speed. The SteadyShot function is set to [On] in the default setting. The SteadyShot scale indicator The (SteadyShot scale) indicator shows the camera shake status. Wait until the scale becomes low, then start shooting. (SteadyShot scale) indicator To deactivate the SteadyShot function MENU button t 1 t [SteadyShot] t [Off] Note • The SteadyShot function may not work optimally when the power has just been turned on or when the shutter button has been pressed all the way down without stopping halfway. Wait for the (SteadyShot scale) indicator scale to go down, and then press the shutter button down slowly. 46