Sony DSR PD170 Operating Instructions - Page 77

Editing Dubbing only desired scenes - Digital program editing (10)Turn the SEL/PUSH EXEC dial to select "CUT-IN," then press the dial. (11)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-IN, then press the dial. The calculated start position for recording is set. (12)Turn the SEL/PUSH EXEC dial to select "CUT-OUT," then press the dial. (13)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-OUT, then press the dial. The calculated stop position for recording is set. (14)Turn the SEL/PUSH EXEC dial to select RETURN, then press the dial. 10,11 OTHERS ED I T SET ADJ TEST "CUT-I N" 0 "CUT-OUT" RETURN [MENU] : END 12,13 OTHERS ED I T SET ADJ TEST "CUT-I N" "CUT-OUT" 0 RETURN [MENU] : END OTHERS ED I T SET ADJ TEST "CUT-I N" 0 "CUT-OUT" RETURN [MENU] : END OTHERS ED I T SET ADJ TEST "CUT-I N" "CUT-OUT" 0 RETURN [MENU] : END Errors in editing If you connect your camcorder to Sony equipment with the DV jack, the range of errors is within +/- 5 frames. The range may become wider in the following conditions: •The interval between CUT-IN and CUT-OUT is less than five seconds (p. 78). •CUT-IN or CUT-OUT is set at the beginning of the tape. 77