Sony DSR-PDX10 Operating Instructions - Page 100
Using the i.LINK cable, When you have finished dubbing a tape - digital camcorder
View all Sony DSR-PDX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Dubbing a tape Using the i.LINK cable Simply connect the i.LINK cable (optional) to the DV Interface on your camcorder and to DV IN on the DV products. With a digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. You cannot dub the titles, display indicators or the contents of cassette memory or letters on the "Memory Stick" index screen. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Prepare the VCR for recording, then set the input selector to LINE. Refer to the operating instructions of the VCR. (3) Set the POWER switch to VCR on your camcorder. (4) Play back the recorded tape on your camcorder. (5) Start recording on the VCR. Refer to the operating instructions of the VCR. DV DV DV IN : Signal flow i. LINK cable (optional) When you have finished dubbing a tape Press xonbothyourcamcorderandtheVCR. You can connect one VCR only using the i.LINK cable See page 241 for more information about i.LINK. Pictures processed by the digital effect or PB ZOOM These pictures are not output through the DV Interface. If you record a playback pause picture with the DV Interface The recorded picture becomes rough. Also, when you play back the picture using other video equipment, the picture may jitter. 100