Sony DSR-PDX10 Operating Instructions - Page 56

Using the fader (1) When fading in [a] In the standby, press FADER until the desired fader indicator flashes. When fading out [b] In the recording, press FADER until the desired fader indicator flashes. The indicator changes as follows: FADER t M. FADER t BOUNCE t MONOTONE (no indicator)T DOT T WIPE T OVERLAP The last selected fader is indicated first of all. (2) Press START/STOP. The fader indicator stops flashing. After fade in/out ends, your camcorder automatically returns to the normal mode. START/STOP 1 FADER FADER To cancel the fader Before pressing START/STOP, press FADER until the indicator disappears. Note You cannot use the following functions while using the fader. Also, you cannot use the fader while using the following functions: - Recordingstillimagesona"MemoryStick"inthetaperecordingorrecording standby - Tapephotorecording - Digitaleffect - Intervalrecording - Framerecording When you select OVERLAP, WIPE, or DOT Your camcorder automatically stores the image recorded on a tape. While the image is being stored, the indicators flash fast, and the playback picture disappears. At this stage, the picture may not be recorded clearly, depending on the tape condition. 56