Sony DSR-PDX10 Operating Instructions - Page 119
Adding audio on a recorded tape, Audio dubbing, Press AUDIO DUB . The green
View all Sony DSR-PDX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Editing Audio dubbing Adding audio on a recorded tape Choose a connection described on the previous pages, and connect audio equipment or microphone to your camcorder. Then follow the procedure below. (1) Insert the recorded tape into your camcorder. (2) Set the POWER switch to VCR on your camcorder. (3) Locate the recording start point by pressing N. Then press X at the point where you want to start recording to set your camcorder to the playback pause. (4) Press AUDIO DUB . The green X indicator appears on the screen. (5) Press X and start playing back the audio you want to record at the same time. The new sound is recorded in channel3/channel4 during playback. While audio is being recorded, the red appears on the screen. (6) Press xat the point where you want to stop recording. AUDIO DUB AUDIO DUB When you dub the recorded sound You can adjust the recorded sound by using MIC LEVEL (p. 80). However, when the camcorder is connected to the AUDIO/VIDEO jack, sound cannot be adjusted. If you set the audio balance beforehand You can monitor both the original sound and dubbed sound during the dubbing. 119