Sony DSR-PDX10 Operating Instructions - Page 26
After recording, Recording a picture, Note on the LOCK switch
View all Sony DSR-PDX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Recording a picture Notes • Fasten the grip strap firmly. • The recording data (date/time or various settings when recorded) are not displayed while recording. However, they are recorded automatically on the tape. To display the recording data, press DATA CODE on PAGE2 during playback. You can also use the Remote Commander for this operation (p. 43). Note on the LOCK switch When you slide the LOCK switch in the direction of the arrow, the POWER switch can no longer be set to MEMORY accidentally. The LOCK switch is set to the further side (unlock position) as the default setting. To enable smooth transition Transition between the last scene you recorded and the next scene is smooth as long as you do not eject the cassette even if you turn off your camcorder. However, check the following: - Do not mix recordings in the DVCAM format and the DV format on one tape. - When you change the battery pack, set the POWER switch to OFF (CHG). - When you use a cassette with cassette memory, however, you can make the transition smooth even after ejecting the cassette if you use the END SEARCH (p. 39). If you leave your camcorder in the standby for five minutes The head drum of the camcorder automatically stops rotating. This is to prevent the tape wear and save the battery power. To re-start recording, press START/STOP. It may take more time to start recording. This is not a malfunction. Note on the recording format The playback picture may be distorted or the time code may not be written properly between scenes when you change the recording format. The battery use time when you record using the LCD screen The battery time is slightly shorter than the shooting time using the viewfinder. After recording (1) SetthePOWERswitchtoOFF(CHG). (2) ClosetheLCDpanel. (3) Ejectthecassette. (4) Removethebatterypack. 26