Sony DVP-F41MS Operating Instructions - Page 33
Step 4: Connecting the Power Cord
View all Sony DVP-F41MS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Hookups When you install the player on the wall Attach the jack cover as in the same way for the horizontal installation. Fastening screws are not supplied. You need to determine the appropriate hanging screws and/or other necessary hardware needed to securely and safely fasten the unit to the wall. Placement of the screws should be at the same height and should be 3 1/4 in. (80 mm) apart. The screws or other fasteners should protrude by 3/16 to 7/32 in. (4 to 5 mm). Please be sure you have selected fasteners or screws that will fit in the hanging holes on the bottom of the unit. Remove the seals covering the hanging holes. Hang the player on the screws. Push the player tightly against the wall. 3 1/4 in. 3/16 in. 3/8 in. 3/16 - 7/32 in. Note WHEN YOU DISCONNECT OR CONNECT THE CORDS, TAKE THE PLAYER DOWN FROM THE WALL. Step 4: Connecting the Power Cord Plug the player and TV power cords into an AC outlet. Do not connect the power cord of your player to the "switched" power socket of an amplifier (receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for the player may be lost. 33