Sony ERS-7 Users Guide: PC Network - Page 54

Specify the SSID used by the wireless LAN access point. Maximum of 32

Page 54 highlights

Appendix When using a DHCP server in your network environment # # WLAN # HOSTNAME=AIBO ESSID=AIBONET WEPENABLE=1 WEPKEY=AIBO2 APMODE=1 Specify the SSID used by the wireless LAN access point. (Maximum of 32 characters. Only alphanumeric characters and symbols are allowed.) Specify the passkey used by the wireless LAN access point (page 56). # # IP network # USE_DHCP=1 # # If DHCP is not used (USE_DHCP=0), you need to specify the # network configuration using IP addresses. # #USE_DHCP=0 #ETHER_IP=192.168.0.100 #ETHER_NETMASK=255.255.255.0 #IP_GATEWAY=192.168.0.1 #DNS_SERVER_1=192.168.0.1 Lines that begin with # are interpreted as comments and are not executed. # # SSDP # SSDP_ENABLE=1 For details about each parameter, refer to "WLANCONF.TXT parameter list" (page 56). 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Appendix
54
When using a DHCP server in your network environment
#
# WLAN
#
HOSTNAME=AIBO
ESSID=AIBONET
WEPENABLE=1
WEPKEY=AIBO2
APMODE=1
#
# IP network
#
USE_DHCP=1
#
# If DHCP is not used (USE_DHCP=0), you need to specify the
# network configuration using IP addresses.
#
#USE_DHCP=0
#ETHER_IP=192.168.0.100
#ETHER_NETMASK=255.255.255.0
#IP_GATEWAY=192.168.0.1
#DNS_SERVER_1=192.168.0.1
#
# SSDP
#
SSDP_ENABLE=1
For details about each parameter, refer to “WLANCONF.TXT parameter list” (page 56).
Specify the SSID used by the wireless LAN access point. (Maximum of 32
characters. Only alphanumeric characters and symbols are allowed.)
Specify the passkey used by the wireless LAN access point (page 56).
Lines that begin with # are
interpreted as comments and are
not executed.