Sony ERS-7 Users Guide: PC Network - Page 55

Set the AIBO, Entertainment Robot's IP

Get Sony ERS-7 - Aibo Entertainment Robot PDF manuals and user guides View all Sony ERS-7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Appendix When not using a DHCP server in your network environment # # WLAN # HOSTNAME=AIBO ESSID=AIBONET WEPENABLE=1 WEPKEY=AIBO2 APMODE=1 Specify the SSID used by the wireless LAN access point. (Maximum of 32 characters. Only alphanumeric characters and symbols are allowed.) Specify the passkey used by the wireless LAN access point (page 56). # # IP network # #USE_DHCP=1 # # If DHCP is not used (USE_DHCP=0), you need to specify the # network configuration using IP addresses. # USE_DHCP=0 ETHER_IP=192.168.0.100 ETHER_NETMASK=255.255.255.0 IP_GATEWAY=192.168.0.1 DNS_SERVER_1=192.168.0.1 # # SSDP # SSDP_ENABLE=1 Lines that begin with # are interpreted as comments and are not executed. Insert # at the beginning of this line. Delete # from the beginning of this line. Set the AIBO® Entertainment Robot's IP address*. Set the AIBO robot's subnet mask address. Enter the IP address of the device that is acting as a router. * For information on the AIBO robot's IP address, refer to page 11. For details about each parameter, refer to "WLANCONF.TXT parameter list" (page 56). 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Appendix
55
When not using a DHCP server in your network environment
#
# WLAN
#
HOSTNAME=AIBO
ESSID=AIBONET
WEPENABLE=1
WEPKEY=AIBO2
APMODE=1
#
# IP network
#
#USE_DHCP=1
#
# If DHCP is not used (USE_DHCP=0), you need to specify the
# network configuration using IP addresses.
#
USE_DHCP=0
ETHER_IP=192.168.0.100
ETHER_NETMASK=255.255.255.0
IP_GATEWAY=192.168.0.1
DNS_SERVER_1=192.168.0.1
#
# SSDP
#
SSDP_ENABLE=1
For details about each parameter, refer to “WLANCONF.TXT parameter list” (page 56).
Specify the SSID used by the wireless LAN access point. (Maximum of 32
characters. Only alphanumeric characters and symbols are allowed.)
Specify the passkey used by the wireless LAN access point (page 56).
Insert # at the beginning of this line.
Delete # from the beginning of this line.
Set the AIBO
®
Entertainment Robot’s IP
address*.
Set the AIBO robot’s subnet mask address.
*
For information on the AIBO robot’s IP
address, refer to page 11.
Lines that begin with # are
interpreted as comments and are
not executed.
Enter the IP address of the device that is acting
as a router.