Sony FDR-X3000R Help Guide - Page 56

Note This function cannot be used when the airplane mode is ON. Even if camera is turned off, the corresponding device will remain on. Even if the camera is turned off, battery will consume when this function is turned on. After use, remove the battery from the camera for storage. [54] Changing the Settings Camera settings GPS log (FDR-X3000/HDR-AS300) You can record the location information and the movement speed while recording movies using the camera's GPS function. Action Cam Movie Creator allows you to import movies recorded with GPS log to your computer and view them with a map showing movement speed and tracking actions. You can also record the location information and show the shooting location on the map when shooting still images. 1 Press the MENU button. 2 Press the UP button or DOWN button to select (Camera Settings) - log) - setting value, then press the REC/ENTER button. (Records movies with the GPS log or still images with location information) (Does not use the GPS log function) (GPS Checking triangulating status The indicator changes according to the strength of GPS signal reception when GPS is activated. No indicator (The GPS log functions is off): The GPS log is set to OFF or an error occurred. (Searching/Difficult): Your camera is searching for GPS satellites. (It may take several minutes to start triangulating.) (Triangulating): Your camera is receiving a GPS signal. (Your camera can record location information.) About GPS assist data The time for the GPS acquiring location information can be shortened by taking in GPS assist data. If connection via Internet is made using the software, Action Cam Movie Creator, the GPS assist data can be updated automatically. If the Date & time Setting of the camera is not set, or set time is shifted greatly, the time for the GPS acquiring location information cannot be shortened.