Sony FX41 Operating Instructions - Page 26
Other Functions, Direct Power On/Off Function, Off & Go Function - vpl lamp
UPC - 027242754775
View all Sony FX41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Other Functions Direct Power On/Off Function If you will be using a circuit breaker to turn the power for the entire system on and off, set the direct power on function to "On." You can turn the power on/off without pressing the power key on the projector. After the power is turned off, the internal circuitry will cause the fan to automatically operate for a certain time. Note The fan does not turn in theVPL-FX41. However, the Direct Power On/Off function has the same performance. Off & Go Function If you are leaving the conference room immediately, turn the projector off. Then you may unplug the AC power cord. It does not matter. After the AC power cord is unplugged, the fan runs for a certain time automatically. Notes • The fan does not turn in theVPL-FX41. However, the Off & Go function has the same performance. • You need more than 15 minutes for a charge power supply. If the projector has been on for less than 15 minutes, the fan might not turn enough as a result of inadequate charging. If the projector has been on for a short time, unplug the AC power cord from the wall outlet after the power off and the ON/ STANDBY indicator lights in red (except with the VPL-FX41). • When the power is turned on soon after it has been turned off, it may take some time until the lamp will light on. Effective Tools for Your Presentation To freeze the image projected (Freeze function) Press the FREEZE key. "Freeze" appears when the key is pressed. This function works when a signal from a computer is input. To restore the original screen, press the FREEZE key again. Controlling the Computer Using a Presentation Tool, RM-PJPK1 (not supplied) (When Using the Network Presentation Function) When you are using the network presentation function to project the picture from a computer, you can perform some operations for a slide show using a presentation tool (not supplied). The following keys on the presentation tool are usable. Key LASER G SLIDE g B Function Emits a laser beam.* Changes the slides in the forward/backward direction. Displays/cancels a black screen during the slide show. * Even if the network presentation function is not used, the LASER key can be used. Notes • If there is any obstruction between the presentation tool and the remote control detector on the projector, the presentation tool may not function properly. • A black screen may not be displayed even if you press the "B" key depending on the operating system (OS) of the language of your computer. • When you use the presentation tool, set "ID Mode" in the Installation menu to "All" or "1." 26 Other Functions