Sony FX41 Operating Instructions - Page 42
For the customers in the USA, Select Lamp Timer Reset, and then
UPC - 027242754775
View all Sony FX41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Notes • Be careful not to touch the glass surface of the lamp. • The power will not turn on if the lamp is not secured properly. 6 Restore the lamp cover to the original position and tighten the three screws with the phillips screwdriver. Note Be sure to attach the lamp cover securely as it was. If not, the projector cannot be turned on. 7 Connect the power cord. The ON/STANDBY indicator lights in red. 8 Press the ?/1 key to turn the projector on. 9 Press the MENU key, and then select the Setup menu. 10Select "Lamp Timer Reset", and then press the ENTER key. A message is displayed. 11Select "Yes", and then press the ENTER key. The Lamp Timer is initialized to 0, and "Lamp Timer Reset Complete!" is displayed in the menu screen. 12Select "OK." Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire. Note To erase a message, press any key on the control panel of the projector or on the Remote Commander. Disposal of the used lamp For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org). 42 Replacing the Lamp