Sony HDR-AS100V Operating Instructions - Handbook - Page 30
About time code, About the user bit
View all Sony HDR-AS100V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Table of contents Operation Search Sets the user bit. • Set four 2-digit numbers, then press the ENTER button. • The user bit can be selected within the following range. 00:00:00:00 (default) - FF:FF:FF:FF Initializes the use bit. • Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button again. Sets the recording time of the user bit. OFF Does not record the time as a user bit (default). ON Records the time as a user bit. Returns to the [UBSET] menu. Notes • When [PRO] is set to [OFF], [TC/UB] is not displayed (page 28). zAbout time code Time code is a useful function for advanced image editing, by recording hours/minutes/ seconds/frames on the image data. When [V.SYS] is set to [NTSC] and the frame rate is 30p or 60p, gaps in the actual time occur during extended periods of recording as there is a slight difference between the number of frames of the time code and the actual frame frequency of NTSC image signal per second. Drop frame corrects this gap to make time code and actual time equal. The first 2 frame numbers (for 30p, or the first 4 frame numbers for 60p) are removed every minute except in every tenth minute. Time code without this correction is called non-drop frame. zAbout the user bit User bit is a function that can record information (8-digit hexadecimal numbers) such as date/time/scene number. This function is useful for editing movies created using two or more cameras. 30GB Settings Search Index