Sony HDR-PJ50V Handycam® Handbook - Page 100
Batteries/power sources, PJ30/PJ30V/PJ50/PJ50V.
UPC - 027242820104
View all Sony HDR-PJ50V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Table of Contents Enjoy Useful Functions The menu settings have been changed automatically. While Intelligent Auto is active, some menu settings related to image quality will be changed automatically. The following menu items return to the default settings when you switch between movie recording and photo recording and playback modes. [ Fader] [ Self-Timer] [Tele Macro] Your camcorder gets warm. Your camcorder may become warm during operation. This is not a malfunction. A rattling noise can be heard when you shake the camcorder. If no noise is heard when the camcorder is turned on and is in the movie/photo recording mode, the noise is produced by the movement of the internal lens. This is not a malfunction. Intelligent Auto is canceled. The Intelligent Auto setting is canceled if you change the following settings: [Smth Slw REC] [Golf Shot] [White Balance] [Spot Meter/Fcs] [Spot Meter] [Spot Focus] [Exposure] [Focus] [Low Lux] [Scene Selection] [Tele Macro] [ SteadyShot] [ SteadyShot] [Auto Back Light] [Face Detection] The supplied Wireless Remote Commander does not function (HDR‑CX360/CX360V/PJ10/PJ30/PJ30V/ PJ50/PJ50V). Set [Remote Ctrl] to [On] (p. 95). Insert a battery into the battery holder with the +/- polarities correctly matching the +/- marks (p. 126). Remove any obstructions between the Wireless Remote Commander and the remote sensor. Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Wireless Remote Commander may not function properly. Another DVD device malfunctions when you use the supplied Wireless Remote Commander (HDR-CX360/CX360V/PJ10/ PJ30/PJ30V/PJ50/PJ50V). Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your DVD device with black paper. Batteries/power sources The power abruptly turns off. Use the AC Adaptor. In the default setting, when about 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off (A. Shut Off). Change the setting of [A. Shut Off] (p. 95), or turn on the power again. Charge the battery pack (p. 14). The CHG (charge) lamp or the /CHG (flash/charge) lamp does not light while the battery pack is being charged. Close the LCD screen (p. 14). Attach the battery pack to the camcorder correctly (p. 14). Index US 100