Sony HDR SR12 Operating Guide - Page 9
Getting Started, Step 1: Charging the battery pack - camcorder
UPC - 027242727755
View all Sony HDR SR12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Getting Started Step 1: Charging the battery pack 5 4 /CHG lamp 3 5 Battery pack DC IN jack 1 2 POWER switch DC plug AC Adaptor To the wall outlet (wall socket) Power cord (Mains lead) You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your camcorder. b Notes • You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder. 1 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. 4 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 5 Set the camcorder onto the Handycam Station securely. The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. 2 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). 3 Turn the POWER switch in the direction of the arrow to OFF (CHG) (the default setting). To remove the battery pack Turn the POWER switch to OFF (CHG). Slide the BATT (battery release) lever and remove the battery pack. BATT (battery release) lever US 9