Sony HDWM2000/20 Operation Manual - Page 131
Item number, Settings, CUEUP, PEAK0, REF.0, ms, 10 ms, a Cross-fade time is 24 ms.
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Menu items in the range 800 to 899, relating to audio control Item number 801 802 803 Item name DIGITAL JOG SOUND DIGITAL AUDIO MUTING IN SHUTTLE MODE DIGITAL AUDIO FADE TIME Settings Turns the digital jog sound on and off. OFF: Digital jog sound is turned off. Audio of digital channels not subjected to speed correction is output. When the tape stops, after one second the audio is muted. ON : Digital jog sound is turned on. When the tape speed is in the range ×-1 to ×1 (for Betacam SX playback, in the range ×-1 to ×2), speed correction is carried out, and the same jog sound as a conventional analog VTR is output. Set the digital audio muting conditions during shuttle playback. OFF : Not muted. CUEUP: Muted during cue-up or preroll operations. FULL: Muted in shuttle mode. Specify the time for cross-fade or fade in/out editing of audio signals. 5 ms, 10 ms , 15 ms, 20 ms, 25 msa), 50 msb), 85 ms, 115 msc) Note The cross-fade or fade in/out operation means that the recording is rewritten from the OUT point for the length specified by this setting. Even at the minimum 5 ms setting, a length of recording corresponding to a field is rewritten. To avoid rewriting, set menu item 317 AUDIO EDIT MODE to CUT. In this case there is an audio discontinuity at the edit point. There is no effect on the recorded video signal. 805 AUDIO MONITOR Select the audio mixing method used for digital audio signals and Betacam OUTPUT MIXING playback analog audio signals supplied to the MONITOR OUTPUT connector. ADD: Simple addition RMS : Root-mean-square AVE: Simple average 806 LEVEL METER SCALE Select the mode in which digital audio levels are displayed. PEAK0 : Displays the audio level as negative values with the maximum level set to 0 dB. REF.0: Displays the audio level as positive and negative values with the reference level set to 0 dB. a) Cross-fade time is 24 ms. b) Actual value is 49 ms. c) Actual value is 114 ms. (Continued) Chapter 10 Setup Menus 10-27 Chapter 10 Setup Menus