Sony HSCU300RF Operation Manual - Page 22

Page name Page No. C04 C05 C06 Item Settings Indication LEVEL GATE Y LEVEL1 Y LEVEL2 GATE MARKER MODULATION MARKER CAM MIC GAIN CH1 CH2 MIC REMOTE MIC OUT DELAY MIC1 LEVEL MIC2 LEVEL CAMERA SYSTEM I/F TERMINATION PGM1 INPUT PGM2 INPUT ---, 1&2, 1, 2, OFF 0 to 108% 49 61 -99 to 99 -25 0 to 108% 74 108 -99 to 99 -25 ---, ON, OFF -99 to 99 0 ---, ON, OFF -99 to 99 0 ON, OFF 4:3, 13:9, 14:9, EU VISTA, VISTA, CINEMA, FOLLOW DC (REMOTE), (LOCAL) ---, 20, 30, 40, 50, 60 dB ---, 20, 30, 40, 50, 60 dB MIC 1&2, MIC 1.2 ---: Displayed when camera not connected, video output not set to CAMERA, or video output is set to CAMERA and GATE MARKER is ON (read only) Level gate 1 minimum and maximum detection levels and zebra range settings Level gate 2 minimum and maximum detection levels and zebra range settings Gate signal display on/off and signal level setting ---: Displayed when camera not connected (read only) 4:3 aspect ratio mask function on/off when EDGE CROP is ON, and mask video level setting ---: Displayed when camera not connected (read only) Marker signal on/off and superimposed signal selection Camera microphone gain settings (REMOTE): MIC REMOTE source (LOCAL): Not MIC REMOTE source Set to match the microphone used. ---: Displayed when camera not connected (read only) MIC REMOTE gain control method MIC 1&2: MIC 1, 2 common gain control MIC 1.2: MIC 1, 2 independent gain control 0, 256, 512, 768, 1024, 1280, 1536, 1792, 2048, 2304, 2560, 2816, 3072, 3328, 3584, 3840FS -20, 0 +4 dBu -20, 0 +4 dBu (ENG/MIC ON), (---/MIC OFF), (PROD/MIC ON) CLEAR COM, 4 WIRE, RTS (OFF), ON, OFF -20, 0, +4 dBu -20, 0, +4 dBu MIC OUT 1, 2 delay setting (3584, 3840FS: HSCU300RF only) Camera settings D-sub 25-pin intercom interface settings 200 Ω, termination when 2WIRE is set to ON. (OFF): When SYSTEM I/F is 4WIRE (read only) PGM1 input level setting PGM2 input level setting 22 Setup Menu