Sony HT-CT260H Operating Instructions - Page 21

BLUETOOTH Function BLUETOOTH Function Using the BLUETOOTH function Pairing automatically If the system is not paired with any equipment, you must pair the system with the equipment to be connected. Select "BT AU" with the INPUT +/ buttons on the remote control to enter pairing mode. 1 Place the system and a BLUETOOTH device within 1 meter (3.3 feet). 2 Press INPUT +/ to select "BT AU." 3 Set the BLUETOOTH device in pairing mode. For details on setting the BLUETOOTH device in pairing mode, refer to the operating instructions supplied with the device. 4 When the detected devices are listed on the BLUETOOTH device, check that "SONY HT-CT260H" is listed. On some BLUETOOTH devices, the list may not be displayed. 5 Select "SONY HT-CT260H" on the list. If entering a Passkey is requested, enter "0000." 6 Make the BLUETOOTH connection on the BLUETOOTH device. When the BLUETOOTH connection is made correctly, the (BLUETOOTH) indicator lights up in blue and the pairing information is stored in the system. About the LED for BLUETOOTH The (BLUETOOTH) indicator lights up or flashes in blue to indicate the BLUETOOTH status. System status Indicator status During BLUETOOTH Flashes quickly in pairing blue. The system is attempting to connect with a BLUETOOTH device Flashes in blue. The system has established in connection with a BLUETOOTH device Lights up in blue. The system is in Flashes slowly in BLUETOOTH blue. standby mode (when the system is off) Notes  For details on operation of the connected devices, refer to the operating instructions supplied with the devices.  The BLUETOOTH devices to be connected must support A2DP (Advanced Audio Distribution Profile).  Use a BLUETOOTH device such as BLUETOOTH mobile phone in an easily visible place in the same room where the Sound Bar is placed.  If Wi-Fi equipment is used, BLUETOOTH communication may become unstable. In that case, use the BLUETOOTH device as close as possible to the Sound Bar. continued 21US