Sony HT-CT260H Operating Instructions - Page 30
WIRELESS SOUND, connected securely.
View all Sony HT-CT260H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Check that the BLUETOOTH connection is made properly between this system and the BLUETOOTH device. Pair this system and the BLUETOOTH device again. Sound skips or the correspondence distance is short. If a device that generates electromagnetic radiation, such as a Wi-Fi network, other BLUETOOTH device(s), or a microwave oven is nearby, move this system away from such sources. Remove any obstacle between this system and the BLUETOOTH device, or move this system away from the obstacle. Locate this system and the BLUETOOTH device as near as possible. Re-position this system. Re-position the BLUETOOTH device. Change the Wi-Fi frequency of the Wi-Fi router, computer, etc., to 5 GHz band. Pairing cannot be done. Bring this system and the BLUETOOTH device closer together. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. The BLUETOOTH connection cannot be completed. Make sure the BLUETOOTH device to be connected is turned on and the BLUETOOTH function is enabled. The BLUETOOTH connection has become disconnected. Make the BLUETOOTH connection again. BLUETOOTH devices cannot be operated on the remote control of the system. Operate the BLUETOOTH device on itself. WIRELESS SOUND Wireless transmission is not activated or there is no sound from the subwoofer. Check the status of the indicator on the subwoofer. Is off: Check that the AC power cord (mains lead) of the subwoofer is connected securely. Turn on the subwoofer by pressing on the subwoofer. Flashes in red: Press to turn off the subwoofer, and check that nothing is blocking the ventilation holes of the subwoofer. Flashes in green slowly or is lit in red: Move the subwoofer so that the indicator lights up in green. Link the system (page 28). Flashes in green quickly: Consult your nearest Sony dealer. Sound skips or has noise. If a device that generates electromagnetic radiation, such as a Wi-Fi network, or a microwave oven is nearby, move this system away from such sources. Remove any obstacle between the Sound Bar and the subwoofer, or move this system away from the obstacle. Locate the Sound Bar and the subwoofer as near as possible. Change the Wi-Fi frequency of the Wi-Fi router, computer, etc., to 5 GHz band. 30US