Sony HT-CT380 Operating Instructions - Page 16
Settings and Adjustments, Using the setup display, Menu list
View all Sony HT-CT380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Settings and Adjustments Using the setup display You can set the following items with the menu. Your settings are retained even if you disconnect the AC power cord (mains lead). 1 Press MENU to turn on the menu on the front panel display. 2 Press BACK/ (select)/ENTER repeatedly to select the item and press ENTER to decide the setting. 3 Press MENU to turn off the menu. Menu list The default settings are underlined. Menu items [LEVEL] (Level) [DRC] (Dynamic range control) [TONE] (Tone) [AUDIO] (Audio) [BASS] (Bass) [TREBLE] (Treble) [SYNC] (AV sync) [DUAL] (Dual mono) [EFFECT] (Sound effect) Function Useful for enjoying movies at low sound volume. DRC applies to Dolby Digital sources. • [ON]: Compresses sound in accordance with the information contained in the content. • [AUTO]: Automatically compresses sound encoded in Dolby TrueHD. • [OFF]: Sound is not compressed. Adjusts the bass level. • The parameters range from [-6] to [+6] in 1-step increments. Adjusts the treble level. • The parameters range from [-6] to [+6] in 1-step increments. You can adjust the sound when the image and the sound are not in sync. • [ON]: Turns on the AV Sync function. • [OFF]: Turns off the AV Sync function. You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. • [M/S]: Main sound is output from the left speaker and sub sound is output from the right speaker. • [MAIN]: Outputs only the main channel. • [SUB]: Outputs only the sub channel. • [ON]: The sound of the selected sound field is played. It is recommended to use this setting. • [OFF]: The input source is down-mixed for 2 channels. Note • Even if [EFFECT] is set to [OFF], [EFFECT] is automatically set to [ON] when you change the sound field setting. 16GB