Sony HT-DDW795 Operating Instructions - Page 12
Installing the speakers on
View all Sony HT-DDW795 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the speakers on the wall You can install your speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker as shown in the illustrations below. more than 4 mm (5/32 inch) more than 25 mm (1 inch) 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude to 5 to 7 mm (7/32 to 9/32 inch). 3 Hang the speakers on the screws. Hook on the back of the speaker 4.6 mm (3/16 inch) 10 mm (13/32 inch) Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 5 to 7 mm (7/32 to 9/32 inch) 12US