Sony ILCE-9M2 Operating Instructions - Page 82
Self-timer, Self-timer Single]
View all Sony ILCE-9M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Self-timer Shoots an image using the self-timer after a designated number of seconds have elapsed since the shutter button was pressed. Use the 5-second/10-second self-timer when you are going to be in the picture, and use the 2-second self-timer to reduce camera-shake caused by pressing the shutter button. 1 Select (Self-timer) by turning the drive mode dial. ••Turn the drive mode dial while holding down the drive mode dial lock release button. 2 MENU (Camera Settings 1) [Self-timer Type] [Self-timer (Single)] desired mode. The mode determines the number of seconds until a picture is taken after the shutter button is pressed. ••The setting screen for [Self-timer Type] can be displayed by pressing the Fn button. Self-timer (Single): 10 sec Self-timer (Single): 5 sec Self-timer (Single): 2 sec 3 Adjust the focus and shoot the image. The self-timer lamp flashes, a beep sounds, and a picture is taken after the designated number of seconds have elapsed. Hint ••Press the shutter button again to stop the count of the self-timer. ••Select a drive mode other than (Self-timer) by turning the drive mode dial to cancel the self-timer. ••Set [Audio signals] to [Off] to turn off the beeping sound during the self-timer countdown. ••To use the self-timer in bracket mode, select (Bracket) by turning the drive mode dial, then select MENU (Camera Settings 1) [Bracket Settings] [Selftimer during Bracket]. GB 82