Sony KD-32FS170 Operating Instructions - Page 33
Using the Clock/Timers
View all Sony KD-32FS170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Analog Menus Using the Clock/Timers Menu To access the Clock/Timers Menu, use the following steps: To Display To Highlight To Select Clock/Timers Timer 1:Set Timer 2:Set Current Time Press v to highlight an option, then press . Move Select End Timer 1 Timer 2 Scheduled viewing Clock/Timers functions apply to analog channels only. You cannot set the Clock/ Timers for digital channels. Use the timers to program your TV to turn on and off by day, time, duration, and channel. The timer duration is a maximum of six hours. When the channel is fixed, it is not necessary to set the channel. 1 Use the V or v buttons to highlight Timer 1 or Timer 2, then press . 2 Use the V or v buttons to enter the desired day, start time, duration, and channel, then press . The timer status should be On when the Timer has been set, and the timer light on the front panel of the TV should be on. 3 Press to exit the menu. ✍ Select Off to turn off the Timer. Your previous settings will be saved. Current Time Set your TV to the current day and time. Press to open the Current Time menu: 1 Use the V or v buttons to enter the correct day and time, then press . 2 Press to exit the menu. ✍ You must set the Current Time before you can use Timer 1 or Timer 2. ✍ When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared. 27