Sony KDL-19M4000/G Operating Instructions - Page 10
Getting Started, Welcome to the World of ®, Connecting the TV, Cable System or VHF/UHF Antenna System - television
View all Sony KDL-19M4000/G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Welcome to the World of ® Thank you for purchasing this Sony LCD Digital Color Television. This manual is for model KDL-19M4000. Be sure to check the supplied accessories against the list on page 39. Connecting the TV To display clear crisp pictures, you must connect your TV correctly and select the correct Wide Mode to display the picture in the correct aspect ratio (see "Changing the Wide Screen Mode" on page 21). It is strongly recommended to connect the antenna/cable input using the 75-ohm coaxial cable (not supplied) to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away from the TV as possible. You can also connect a variety of optional equipment to your TV (see page 14). For multiple equipment connections, please refer to the Quick Setup Guide. Cable System or VHF/UHF Antenna System Cable or VHF/UHF (or VHF only) Antenna 75-ohm coaxial cable (not supplied) Rear of TV CABLE/ANTENNA input From Cable settings in Channel settings, select Cable On or Cable Off for your type of input signal. 10