Sony KDL-19M4000/G Operating Instructions - Page 37

Other Information Preparation for Wall Mounting This TV can be installed on a wall by using a wall-mount bracket (sold separately). Before mounting the TV on a wall, the handle and stand must be removed from the TV. Do not remove the stand for any reason other than to wall-mount the TV. Sony Wall-Mount Bracket Model SU-WL100 Follow the simple steps below to remove the handle and stand: 1 Disconnect all the cables from the TV. 2 Cover a level and stable surface with a thick and soft cloth. 3 Gently lay the TV face down onto the cloth. 4 Remove the screws and detach the handle [see illustration A]. 5 Remove the screws and detach the stand from the TV [see illustration B]. Be sure to hold the stand firmly while removing the last screw. 6 Do not remove any other screws from the TV. For bracket installation, refer to the instruction guide provided by the WallMount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors. Handle Stand Other Information Soft cloth Be sure to store the removed screws, handle and stand in a safe place until you are ready to reattach the handle and stand. Keep the screws away from small children. 37