Sony KDL-19M4000/G Operating Instructions - Page 11

Getting Started Getting Started Cable Box/Digital Cable Box z To change channels using the cable box, set your TV to channel 3 or 4 depending on the cable box channel output. Auto Program will fix the channel automatically. Use this hookup if s You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels, and s You do not intend to hook up any other audio or video equipment to your TV. Cable 75-ohm coaxial cable (not supplied) Rear of TV CABLE/ANTENNA input IN OUT jack jack Also, set Cable to On in the Cable settings in Channel settings (see page 29). Cable System and VHF/UHF Antenna System Cable A/B RF Switch A B Antenna If you want to watch both antenna (over-the-air) and cable broadcast signals, you'll need to use an optional A-B RF switch (not supplied), as shown below. Rear of TV Use the A-B selector to switch between the CABLE/ANTENNA over-the-air signals and the cable signals. Then input set the Cable setting in the Channel settings to On or Off, as described on page 29. 11