Sony KDL-47W800A Operating Instructions - Page 32

Additional Information Safety Information WARNING Batteries must not be exposed to excessive heat such as sunshine, fire or the like. Installation/Set-up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation • The TV set should be installed near an easily accessible AC power outlet (mains socket). • Place the TV set on a stable, level surface to avoid it from falling down and cause personal injury or damage to the TV. • Only qualified service personnel should carry out wall installations. • For safety reasons, it is strongly recommended that you use Sony accessories, including: - Wall-Mount Bracket: SU-WL400 • Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting hooks to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8mm - 12mm Screw (supplied with the Wall-Mount Bracket) Mounting Hook Hook attachment on rear of TV set Transporting • Before transporting the TV set, disconnect all cables. • Two or three people are needed to transport a large TV set. • When transporting the TV set by hand, hold it as shown below. Do not put stress on the LCD panel and the frame around the screen. • When transporting the TV set, do not subject it to jolts or excessive vibration. • When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Ventilation • Never cover the ventilation holes or insert anything in the cabinet. • Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate aircirculation. Installed on the wall 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. Installed with stand 30 cm 10 cm 10 cm 6 cm Leave at least this space around the set. • To ensure proper ventilation and prevent the collection of dirt or dust: - Do not lay the TV set flat, install upside down, backwards, or sideways. - Do not place the TV set on a shelf, rug, bed or in a closet. - Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. - Do not install the TV set as shown below. Air circulation is blocked. Wall Wall AC power cord (mains lead) Handle the AC power cord (mains lead) and outlet (mains socket) as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: - Use only Sony supplied AC power cords (mains lead), not those of other brands. - Insert the plug fully into the AC power outlet (mains socket). - Operate the TV set on a 110-240 V AC supply only. - When wiring cables, be sure to unplug the AC power cord (mains lead) for your safety and take care not to catch your feet on the cables. - Disconnect the AC power cord (mains lead) from the AC power outlet (mains socket) before working on or moving the TV set. - Keep the AC power cord (mains lead) away from heat sources. - Unplug the AC power plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Notes • Do not use the supplied AC power cord (mains lead) on any other equipment. • Do not pinch, bend, or twist the AC power cord (mains lead) excessively. The core conductors may be exposed or broken. • Do not modify the AC power cord (mains lead). • Do not put anything heavy on the AC power cord (mains lead). • Do not pull on the AC power cord (mains lead) itself when disconnecting the AC power cord (mains lead). • Do not connect too many appliances to the same AC power outlet (mains socket). • Do not use a poor fitting AC power outlet (mains socket). 32 GB