Sony KDL-47W800A Operating Instructions - Page 7
: Attaching the Table-Top Stand - tv
View all Sony KDL-47W800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1: Attaching the Table-Top Stand Except KDL-55/46W954A, KDL-55/46W950A Getting Started Refer to the supplied Table-Top Stand leaflet for proper attachment. 1 Place the TV set on the Table-Top Stand. KDL-55/46W954A, KDL-55/46W950A Guide pins Except KDL-55/46W954A, KDL-55/46W950A Guide pins 2 Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks indicate the location of the screw holes used for securing the Table-Top Stand. KDL-55/46W954A, KDL-55/46W950A ~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. 3 Fix the rear cover (KDL-55/46W954A, KDL-55/46W950A only). 2 x 8 1 3 x 8 ~ • Be careful when pulling out the AC power cord to avoid the rear cover from pop out. Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 2. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. 7 GB