Sony KDS-50A2020 Operating Instructions - Page 31

TV Controls To open the cover Basic Operations Basic Operations Be careful not to pinch your fingers when opening the cover. OPEN TIMER LAMP POWER POWER 0 MENU TV/VIDEO VOLUME CHANNEL TIMER LAMP POWER POWER 12 3 4 567 8 9 Item 1 MENU 2 TV/VIDEO 3 VOLUME +/- 4 CHANNEL +/- 5 TIMER LED 6 LAMP LED 7 POWER LED 8 (IR) Infrared Receiver 9 POWER q; Speaker Description Press to display MENU with TV functions and settings (see "Overview of MENU" on page 32). Press to cycle through the video inputs. If you set a certain input to Skip in Label Video Inputs, then the input will not appear. For details, see page 45. In the MENU screen, this button serves as confirming the selection or setting. Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons. Press to scan through channels. To scan quickly through channels, press and hold down either -/+. In the MENU screen, these buttons serve as up/down buttons. When the timer is set, this LED will remain lit even if the TV is turned off. For details, see page 46. Blinks in red when the lamp for the light source has burned out. For details, see "Replacing the Lamp" on page 51. Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may indicate the display unit needs servicing (see the contacting Sony information on page 2). When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is not securely attached (see page 53). Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected. Press to turn on and off the TV. Outputs the audio signal. ✍ The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV. 31