Sony KDS-50A2020 Operating Instructions - Page 53
Reattach the lamp door., Slide the lever to the right and then turn the screw clockwise to secure - blinks 5 times
UPC - 027242714816
View all Sony KDS-50A2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Other Information Other Information ✍ Do not touch the inside of the lamp compartment. ✍ The lamp is very hot immediately after use. Never touch the glass portion of the lamp or the surrounding parts. ✍ After the used lamp has cooled, place it into the empty box of the replacement lamp. Never put the used lamp into a plastic bag. 7 Put the new lamp into its place. Insert the new lamp by pressing the two parts firmly into place as shown in the illustration. Make sure the lamp is securely mounted into the compartment. Failure to do so may cause a fire or the screen to go dark. ✍ The lamp compartment is tilted, as shown in the following illustration. ✍ If the lamp is not securely reattached, the self-diagnostic function may be triggered and the POWER LED blinks three times (see page 31). 8 Reattach the lamp door. Replace the door by inserting the two tabs in the slot from the left side. Slide the lever to the right and then turn the screw clockwise to secure the door. (Continued) 53