Sony KLV32S400A Revision History - Page 70
Using MENU Functions, Manual Programme, Preset, Label, Audio Filter, Colour System
UPC - 011110668585
View all Sony KLV32S400A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Using MENU Functions Manual Programme Preset Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Colour System"/"Signal Booster", press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to "Skip" (page 31). Programme/TV System/VHF or UHF Presets programme channels manually. 1 Select "Programme", then press . 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press RETURN. 3 Press F/f to select "TV System", then press . 4 Press F/f to select your TV broadcast systems, then press . 5 Press F/f to go to the frequency range indication ("VHF Low", "VHF High" or "UHF"), then press . 6 Tune the channels as follows: Press G/g to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press G/g. Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 2 to 4 of "Programme Labels" (page 30). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of -15 to +15. When "On" is selected, the fine tuning is performed automatically. Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting "Off". ~ • You cannot receive stereo or dual sound when "Low" or "High" is selected. Skip Skips unused channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) Colour System Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43" or "PAL60") according to the channel. Signal Booster (Intelligent Signal Booster) Improves the picture quality if the TV signal is too strong or weak. Press F/f to select either "Off" if the signal is too strong (picture distorted; picture with lines; signal interference) or "Auto" if the signal is weak (snowy picture), then press . Signal Level Displays the signal level for programme currently being watched. red amber green (weak) (average) (good) 31 GB