Sony KP-65WV700 Primary User Manual - Page 36

Watch the VCR

Page 36 highlights

SETUP Notes on Using This Connection To Do This ... Do This ... Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration). The VCR may need to be turned on and set to the satellite receiver input. Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected (VIDEO 1 in the illustration). Set up the TV remote control to operate the satellite receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the remote control. See "Programming the Remote Control" on pages 51-52. Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, open the control to operate the satellite outside cover, as shown on page 50. Then set the A/V slide switch to the receiver or VCR position you programmed for the VCR. Control satellite receiver and See "Operating a Satellite Receiver" on page 53 and "Operating a VCR" on VCR functions with the TV page 53. remote control Label video inputs to easily See the instructions for setting up Video Labels on pages 83-84. identify equipment connected to the TV Setup SETUP SETUP SETUP SETUP 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101

35
SETUP
Setup
SETUP
SETUP
SETUP
SETUP
Notes on Using This Connection
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See
Programming the Remote Control
on pages 51-52.
Activate the TV remote
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION
. For the VCR, open the
outside cover, as shown on page 50. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control
See
Operating a Satellite Receiver
on page 53 and
Operating a VCR
on
page 53.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 83-84.