Sony KP-65WV700 Primary User Manual - Page 46
Adjusting the Convergence Manually, Before using the manual Convergence - blue screen
View all Sony KP-65WV700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SETUP Adjusting the Convergence Manually The Convergence feature gives you more control over the picture's convergence than the Flash Focus feature, allowing you to fine-tune the convergence. ✍ Before using the manual Convergence, you must first perform Flash Focus (as described on page 44). z For details on using the Setup Menu, see page 83. 1 Press MENU to display the Menu. 2 Move the joystick B or b to highlight the Setup icon and press . 3 Move the joystick to highlight Convergence and press . A pattern of white crosses appears, with a yellow around one of the crosses. Aligned crosses (which do not need adjustment) look white and have little or no red or blue showing. Crosses that are not aligned show red or blue shades beyond their edges. Setup SETUP SETUP SETUP You can scroll up and down through the 9 x 7 field of crosses to manually converge all portions of the screen. 4 Using the joystick, move the to surround a cross that you want to adjust. Press . The changes to red. 5 If the cross that you selected has red edges, move the joystick until the red image is replaced with a white cross. Once you have finished this (or the cross does not have red edges), press . The changes to blue. 6 If the cross you selected has blue edges, move the joystick until the blue image is replaced with a white cross. Once you have finished this, press . The changes to yellow again. 7 Repeat steps 4 to 6 to adjust other crosses. When finished, press MENU to exit the Setup Menu. 45 SETUP