Sony MEX-BT3100P Operating Instructions - Page 44

USB playback, Bluetooth function, The name of the detected device does

Get Sony MEX-BT3100P PDF manuals and user guides View all Sony MEX-BT3100P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

The display items do not scroll.  For discs with very many characters, those may not scroll.  "AUTO SCR" is set to "OFF." - Set "A.SCRL-ON" (page 36). - Press and hold SCRL). The sound skips.  Installation is not correct. - Install the unit at an angle of less than 45° in a sturdy part of the car.  Defective or dirty disc. USB playback You cannot play back items via a USB hub.  This unit cannot recognize USB devices via a USB hub. Cannot play back items.  A USB device does not work. - Connect it again. A USB device takes longer to play back.  The USB device contains files with a complicated tree structure. The sound is intermittent.  The sound may be intermittent at a high-bit- rate of more than 320 kbps. Pandora® connection is not possible.  Shut down Pandora® application on the mobile device, and then launch again. Application name is mismatched with the actual application in App Remote.  Launch the application again from the "App Remote" application. Bluetooth function The connecting device cannot detect this unit.  Before the pairing is made, set this unit to pairing standby mode.  While connected to a Bluetooth device, this unit cannot be detected from another device. - Disconnect the current connection and search for this unit from another device.  When the device pairing is made, set the 44 Bluetooth signal output to on (page 21, 23, 24). Connection is not possible.  The connection is controlled from one side (this unit or Bluetooth device), but not both. - Connect to this unit from a Bluetooth device or vice versa.  Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear.  Depending on the status of the other device, it may not be possible to obtain the name. No ringtone.  Adjust the volume by rotating the control dial while receiving a call.  Depending on the connecting device, the ringtone may not be sent properly. - Set "RINGTONE" to "1" (page 21).  The front speakers are not connected to the unit. - Connect the front speakers to the unit. The ringtone is output only from the front speakers. The talker's voice volume is low.  Adjust the volume level. The talker's voice cannot be heard.  The front speakers are not connected to the unit. - Connect the front speakers to the unit. The talker's voice is output only from the front speakers. A call partner says that the volume is too low or high.  Adjust the volume accordingly using mic gain adjustment (page 26). Echo or noise occurs in phone call conversations.  Lower the volume.  Set EC/NC Mode to "EC/NC-1" or "EC/NC-2" (page 26).  If the ambient noise other than the phone call sound is loud, try reducing this noise. E.g.: If a window is open and road noise, etc., is loud, shut the window. If an air conditioner is loud, lower the air conditioner.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
44
The display items do not scroll.
For discs with very many characters, those may
not scroll.
“AUTO SCR” is set to “OFF.”
–
Set “A.SCRL-ON” (page 36).
–
Press and hold

(SCRL).
The sound skips.
Installation is not correct.
–
Install the unit at an angle of less than 45° in
a sturdy part of the car.
Defective or dirty disc.
USB playback
You cannot play back items via a USB hub.
This unit cannot recognize USB devices via a
USB hub.
Cannot play back items.
A USB device does not work.
–
Connect it again.
A USB device takes longer to play back.
The USB device contains files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Pandora® connection is not possible.
Shut down Pandora® application on the mobile
device, and then launch again.
Application name is mismatched with the
actual application in App Remote.
Launch the application again from the “App
Remote” application.
Bluetooth function
The connecting device cannot detect this
unit.
Before the pairing is made, set this unit to
pairing standby mode.
While connected to a Bluetooth device, this
unit cannot be detected from another device.
–
Disconnect the current connection and
search for this unit from another device.
When the device pairing is made, set the
Bluetooth signal output to on (page 21, 23, 24).
Connection is not possible.
The connection is controlled from one side
(this unit or Bluetooth device), but not both.
–
Connect to this unit from a Bluetooth device
or vice versa.
Check the pairing and connection procedures
in the manual of the other device, etc., and
perform the operation again.
The name of the detected device does not
appear.
Depending on the status of the other device, it
may not be possible to obtain the name.
No ringtone.
Adjust the volume by rotating the control dial
while receiving a call.
Depending on the connecting device, the
ringtone may not be sent properly.
–
Set “RINGTONE” to “1” (page 21).
The front speakers are not connected to the
unit.
–
Connect the front speakers to the unit. The
ringtone is output only from the front
speakers.
The talker’s voice volume is low.
Adjust the volume level.
The talker’s voice cannot be heard.
The front speakers are not connected to the
unit.
–
Connect the front speakers to the unit. The
talker’s voice is output only from the front
speakers.
A call partner says that the volume is too low
or high.
Adjust the volume accordingly using mic gain
adjustment (page 26).
Echo or noise occurs in phone call
conversations.
Lower the volume.
Set EC/NC Mode to “EC/NC-1” or “EC/NC-2”
(page 26).
If the ambient noise other than the phone call
sound is loud, try reducing this noise.
E.g.: If a window is open and road noise, etc., is
loud, shut the window. If an air conditioner is
loud, lower the air conditioner.