Sony MEX-BT4000P Operating Instructions - Page 14
iPod, Playing back an iPod - iphone
View all Sony MEX-BT4000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Notes • Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. • Do not detach the front panel during playback of the USB device, otherwise USB data may be damaged. Changing display items Press Displayed items may differ depending on the USB device, recording format and settings. Notes • The maximum number of displayable data is as follows. - folders (albums): 128 - files (tracks) per folder: 500 • It may take time for playback to begin, depending on the amount of recorded data. • DRM (Digital Rights Management) files may not be played. • During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3/WMA/AAC file, elapsed playing time may not display accurately. • Playback of the following MP3/WMA/AAC files is not supported. - lossless compression - copyright-protected iPod In these Operating Instructions, "iPod" is used as a general reference for the iPod functions on the iPod and iPhone, unless otherwise specified by the text or illustrations. For details on the compatibility of your iPod, see "About iPod" (page 38) or visit the support site on the back cover. Playing back an iPod Before connecting the iPod, turn down the volume of the unit. 1 Open the USB cover, then connect the iPod to the USB connector with a USB connection cable for iPod (not supplied)*. * RC-100IP USB connection cable for iPod is recommended. The tracks on the iPod start playing automatically from the point last played. If an iPod is already connected, to start playback press repeatedly until "USB" appears. ("IPD" appears in the display when iPod is recognized.) Press and hold for 1 second to stop playback. To remove the iPod, stop iPod playback, then remove the iPod. 14