Sony MEX-BT4000P Operating Instructions - Page 34
Adjusting setup items, Using rear speakers as a, subwoofer - Rear Bass, Enhancer
View all Sony MEX-BT4000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using rear speakers as a subwoofer - Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying a low pass filter setting (page 35) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 1 During reception/playback, press the select button. 2 Rotate the control dial until "RB ENH" appears, then press it. 3 Rotate the control dial to select from "1," "2" or "3," then press it. 4 Press (BACK). Adjusting setup items 1 Press and hold the select button. The setup display appears. 2 Rotate the control dial until the desired item appears, then press it. 3 Rotate the control dial to select the setting, then press it.* The setting is complete. 4 Press (BACK). * For CLOCK-ADJ and BTM settings, step 4 is not necessary. And for BT SIGNL and PAIRING settings, step 3 and 4 are not necessary. The following items can be set depending on the source and setting: CLOCK-ADJ (Clock Adjust) (page 7) CT (Clock Time) Activates the CT function: "ON," "OFF" (page 12). BEEP Activates the beep sound: "ON," "OFF." CAUT ALM (Caution Alarm)*1 Activates the caution alarm: "ON," "OFF" (page 7). AUX-A (AUX Audio)*1 Activates the AUX source display: "ON," "OFF" (page 36). AUTO OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." DEMO (Demonstration) Activates the demonstration: "ON," "OFF." 34