Sony MEX-BT4000P Operating Instructions - Page 24
Connecting an audio device, dial until SET BT SIGNL appears - bluetooth
View all Sony MEX-BT4000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 Turn on the cellular phone and activate the Bluetooth signal. 3 Connect to this unit using the cellular phone. " " appears when the connection is made. If you select the Bluetooth Phone source after the connection is made, the network name and the connected cellular phone name appear in the display. Icons in the display: Signal strength status of connected cellular phone.* Remaining battery status of connected cellular phone.* * Turns off without handsfree connection. Differs in the case of a cellular phone. Changing display items Press Connecting the last-connected cellular phone from this unit 1 Make sure the Bluetooth signal of the cellular phone is activated. 2 Press repeatedly until "BT PHONE" appears. 3 Press (handsfree). " " flashes while the connection is being made, then stays lit while connected. Notes • Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. • While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. A connecting noise may be heard over playback sound. 24 Tip With Bluetooth signal on: when the ignition is turned to on, this unit reconnects automatically to the last-connected cellular phone. But automatic connection also depends on the cellular phone's specification. If automatic connection is not made, connect manually. Connecting an audio device 1 Press and rotate the control dial until "SET BT SIGNL" appears, then press it. " " lights up when Bluetooth signal is activated. 2 Turn on the audio device and activate the Bluetooth signal. 3 Connect to this unit using the audio device. " " appears when the connection is made. Connecting the last-connected audio device from this unit 1 Make sure the Bluetooth signal of the audio device is activated. 2 Press repeatedly until "BT AUDIO" appears. 3 Press (PAUSE). " " flashes while the connection is being made, then stays lit while connected.