Sony MEX-N4000BT Operating Instructions - Page 9

Connecting Other Portable Audio Device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect the portable audio device to the AUX input jack (stereo mini jack) on the unit with a connecting cord (not supplied)*. * Be sure to use a straight type plug. 4 Press SRC to select [AUX]. To match the volume level of the connected device to other sources Start playback of the portable audio device at a moderate volume, and set your usual listening volume on the unit. Press MENU and rotate the control dial. Select [SOUND]  [AUX VOL] (page 18). Listening to the Radio Listening to the Radio To listen to the radio, press SRC to select [TUNER]. Storing automatically (BTM) 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Press MENU, rotate the control dial to select [GENERAL], then press it. 3 Rotate the control dial to select [BTM], then press it. The unit stores stations in order of frequency on the number buttons. Tuning 1 Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2). 2 Perform tuning. To tune manually Press and hold SEEK +/- to locate the approximate frequency, then press SEEK +/- repeatedly to fine adjust to the desired frequency. To tune automatically Press SEEK +/-. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Storing manually 1 While receiving the station that you want to store, press and hold a number button (1 to 6) until [MEM] appears. Receiving the stored stations 1 Select the band, then press a number button (1 to 6). 9GB