Sony MEX-N5300BT Operating Instructions - Page 31
USB device playback, NFC function MEX-N5300BT only, BLUETOOTH function, low or high.
View all Sony MEX-N5300BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
USB device playback A USB device takes longer to play. The USB device contains files with a complicated tree structure. The audio file cannot be played. For details on supported formats, see "Specifications" (page 27). If the audio file still cannot be played, refer to the operating instructions supplied with the USB device, or contact the manufacturer of the USB device. Operations for skipping an album, skipping items (Jump mode), and searching a track by name ("QuickBrowZer") cannot be performed. Set [USB MODE] to [MSC/MTP] (page 22). The sound cannot be output during playback in Android mode. Check the status of the audio playback application on the Android smartphone. NFC function (MEX-N5300BT only) One-touch connection (NFC) is not possible. If the smartphone does not respond to the touching. - Check that the NFC function of the smartphone is turned on. - Move the N-Mark part of the smartphone closer to the N-Mark part on this unit. - If the smartphone is in a case, remove it. NFC receiving sensitivity depends on the device. If One-touch connection with the smartphone fails several times, make BLUETOOTH connection manually. BLUETOOTH function The connecting device cannot detect this unit. Before the pairing is made, set this unit to pairing standby mode. While connected to two BLUETOOTH devices, this unit cannot be detected from another device. - Disconnect either connection and search for this unit from another device. When the device pairing is made, set the BLUETOOTH signal output to on (page 10). Connection is not possible. The connection is controlled from one side (this unit or BLUETOOTH device), but not both. - Connect to this unit from a BLUETOOTH device or vice versa. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. No ringtone. Adjust the volume by rotating the control dial while receiving a call. Depending on the connecting device, the ringtone may not be sent properly. - Set [RINGTONE] to [1] (page 24). The speakers are not connected to the unit. - Connect the speakers to the unit. To select the speakers for ringtone, press MENU, then select [BLUETOOTH] [SET VOICE-OUT] (page 25). The talker's voice cannot be heard. The speakers are not connected to the unit. - Connect the speakers to the unit. To select the speakers for talker's voice, press MENU, then select [BLUETOOTH] [SET VOICE-OUT] (page 25). A call partner says that the volume is too low or high. Adjust the volume accordingly using Mic gain adjustment (page 18). 31GB