Sony MEX-N5300BT Operating Instructions - Page 42
Installing the microphone, Using the wired remote control, Cautions
![]() |
View all Sony MEX-N5300BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing the microphone To capture your voice during handsfree calling, you need to install the microphone . Clip (not supplied) Cautions • It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. • If airbags or any other shock-absorbing equipment is in your car, contact the store where you purchased this unit, or the car dealer, before installation. Note Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth. Using the wired remote control When using the steering wheel remote control Installation of the connection cable RC-SR1 (not supplied) is required before use. 1 To enable the steering wheel remote control, select [SET STEERING] [EDIT CUSTOM] to make the registration (page 22). When the registration completes, the steering wheel remote control becomes available. Notes on installing the connection cable RC-SR1 (not supplied) • Refer to the support sites on the back cover for details, then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit. • Depending on the type of car, be sure to insulate the unused leads with electrical tape for safety. • Do not connect this cable when the steering wheel remote control is not used. • Consulting the dealer or an experienced technician for help is recommended. When using the wired remote control 1 To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [PRESET] (page 22). 42GB
![](/manual_guide/products/sony-mexn5300bt-operating-instructions-79f8fa3/42.png)