Sony MHC-MG310AV Operating Instructions (primary manual) - Page 12

Saving the power in standby mode, CD, Loading a CD, Saving Mode - 60 cd

Page 12 highlights

Saving the power in standby mode Press DISPLAY repeatedly while the system is off. Each time you press the button, the system switches cyclically as follows: Demonstration t Clock display t Power Saving Mode Tips • ?/1 indicator lights up even in the Power Saving Mode. • The timer functions in the Power Saving Mode. Note You cannot set the time in the Power Saving Mode. To cancel the Power Saving Mode Press DISPLAY once to show the demonstration or twice to show the clock display. CD Loading a CD You can load up to 60 discs into this unit. Turn on the system before you load CDs. 1 Open the front cover by pushing the right edge of the cover. Front cover 2 Turn DISC ACCESS (or press TDISC or DISCt on the remote) until you find the disc slot where you want to insert a disc, while checking the disc number (written beside every slot and also indicated in the display). Disc slot at the loading Disc number position (located at the very front) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

12
CD
Saving the power in
standby mode
Press DISPLAY repeatedly while the
system is off. Each time you press the
button, the system switches cyclically as
follows:
Demonstration
t
Clock display
t
Power
Saving Mode
Tips
?/1
indicator lights up even in the Power Saving
Mode.
The timer functions in the Power Saving Mode.
Note
You cannot set the time in the Power Saving Mode.
To cancel the Power Saving Mode
Press DISPLAY once to show the
demonstration or twice to show the clock
display.
Loading a CD
You can load up to 60 discs into this unit.
Turn on the system before you load CDs.
1
Open the front cover by pushing the
right edge of the cover.
Front cover
2
Turn DISC ACCESS (or press
T
DISC
or DISC
t
on the remote) until you find
the disc slot where you want to insert a
disc, while checking the disc number
(written beside every slot and also
indicated in the display).
Disc slot at the loading
position
(located at the very front)
Disc number