Sony MHC-MG310AV Operating Instructions (primary manual) - Page 18
Tuner, Presetting radio stations
View all Sony MHC-MG310AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Tuner Presetting radio stations You can preset up to 20 stations for FM and 10 stations for AM. 1 Press TUNER/BAND repeatedly to select "FM" or "AM". 2 Press and hold m or M until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. "TUNED" and "STEREO" (for a stereo program) appear. 3 Press MENU. 4 Press - . or > + (or . or > on the remote) repeatedly until "MEMORY" appears, then press ENTER. A preset number appears. To tune in a station with a weak signal Press m or M repeatedly in step 2 to tune in the station manually. To set another station to an existing preset number Start over from step 1. After step 4, press - . or > + repeatedly to select the preset number you want to store the other station. To change the AM tuning interval The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding down ENTER, turn the system back on. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Preset number 5 Press - . or > + (or . or > on the remote) repeatedly to select the desired preset number. 6 Press ENTER. "COMPLETE" appears. The station is stored. 7 Repeat steps 1 to 6 to store other stations. 18